Copyright © GSE ONLINE SDN BHD ( 1116968-P ) ALL RIGHTS RESERVED
www.esdonlinemarketing.com www.esdMalaysia.com
www.esdonlinemarketing.com www.esdMalaysia.com
BLACK ESD MAT
Why do we need anti-static protection for our equipment?Why should we be concerned about the impact of electrostatic discharge?
Why anti-static carpeting/coverage for your facility?
Anti-static mats are normally used to prevent damage to sensitive electronic equipment which is caused by uncontrolled electro-static discharge (ESD).
Anti-static mats are normally used to prevent damage to sensitive electronic equipment which is caused by uncontrolled electro-static discharge (ESD).
Use of a properly grounded anti-static mat ( with grounding cable ) on your workstation & workbench is an essential ESD protection measure that nowaday is a MUST by most sensitive electronic device manufacturers in the prevention of ESD interruption.
Electrostatic Discharge (ESD) is an ever-increasing problem for the electronics industry. As components get more sensitive, no manufacturer can ignore the significant impact of ESD affecting their component's reliability.
In many cases, ESD causes electromagnetic interference (EMI) that contributes to equipment malfunction.
Working in ESD Free environment is essential nowadays to secure their product's reliability and reduce wastage due to the interruption of ESD.
Applications:-
Product Line, CMOS chips, microprocessor, semiconductor, dish drivers, composites, LCD screen product, circuit product line, hospitals and Pharmaceutical industries, precision instrument, optic parts.
Our ESD Characteristic :-
1) Part / Model No. : ESD2BLK1X10S
2) Compliant to GB/T14437-97 .
3) RoHS compliant .
4) Top Layer Material : Black ( NBR Rubber ) ,
Bottom Layer Material : Black ( Synthetic Rubber ).
5) Surface Resistivity :
a) Top ( 1.0 × 10 e6 ~ 1.0 × 10 e9 Ohms )
b) Bottom ( 1.0 × 10 e2 ~ 1.0 × 10 e6 Ohms )
6) Hardness ( IRHD , Wallace Micro Hardness Tester )
a) Top Black Layer : 70 ± 5 ° Shore A
b) Bottom Black layer : 50 ± 5 ° Shore A
7) Overall Thickness : Minimum 2.00 mm
8) ( Width ) : 1m ,
9) Length : 10 m / Roll
10) Surface Finishing : Shining ( Glossy )
Our ESD Characteristic :-
1) Part / Model No. : ESD2BLK1X10S
2) Compliant to GB/T14437-97 .
3) RoHS compliant .
4) Top Layer Material : Black ( NBR Rubber ) ,
Bottom Layer Material : Black ( Synthetic Rubber ).
5) Surface Resistivity :
a) Top ( 1.0 × 10 e6 ~ 1.0 × 10 e9 Ohms )
b) Bottom ( 1.0 × 10 e2 ~ 1.0 × 10 e6 Ohms )
6) Hardness ( IRHD , Wallace Micro Hardness Tester )
a) Top Black Layer : 70 ± 5 ° Shore A
b) Bottom Black layer : 50 ± 5 ° Shore A
7) Overall Thickness : Minimum 2.00 mm
8) ( Width ) : 1m ,
9) Length : 10 m / Roll
10) Surface Finishing : Shining ( Glossy )
11) SGS Test Report : CRSSA/190411628-CA09975
GSE ONLINE SDN BHD( 1116968-P )
Mobile No.
012-6255 512
016-2555 632
E-mail :
sales@esdMalaysia.com
ESD2BLK1X10S
** The photograph may not clearly reflect the exact color as listed due to the camera, the lighting and other factors such as your screen settings, and color may vary slightly due to the color calibration of each individual monitor
