Disclaimer : * Note : Users need to evaluate suitability for their industries use ( applications ) before placing order from us . The Information provided on this website best advsie our customers corresponds to current electrical matting standards . In the individual case it is the sole responsibility of the customer to evaluate requirements , in particular if specified properties are sufficient for use .
NON CONDUCTIVE SWITCHBOARD RUBBER MAT
Model: GS-SL ( Medium Voltage ), Top Surface: Anti Slip Corrugated IEC 61111:2009 : CLASS 1 , Voltage Withstand Clause 188.8.131.52 Dielectric Test Voltage: 20kV, Nominal Maximum Use Voltage: 7.5 kV A) Which product is the correct Electrical Insulating Matting for protection against electric shock risk? BS EN 61111:2009 is the latest standard for electrical insulating matting in providing electrical protection. B) International Withdrawal of BS921:1976? This old standard is being withdrawn on 1st Jan 2013 ( Standard number, BS 921: 1976, Published in March 1976, Specification: Rubber mats for electrical purposes, status: WITHDRAWN ) as it conflicts with IEC61111:2009. C) Quality Assurance Our Switchboard Mattings are backed with a detailed test certificate from an independently accredited Malaysia Test Facility. Our Switchboard matting / high voltage insulation rubber was tested according to TNB technical specifications: A) BS EN 61111 Clause 184.108.40.206, Voltage Withstand Test Scope , Usage & Application :- High Voltage Insulation Rubber Mats / Non-Conductive Mats - Most commonly called Switchboard matting, these non-conductive mats insulate workers, protecting them from deadly shocks generated by high voltage equipment. High Voltage Insulation Rubber mats are used as a floor covering around electrical panels such as Power Transformer Rooms, Sub-Station, High Voltage Panels, LT & HT Labs, Control Panels etc. It acts as a safety pre-cautious for workers from electrical shock whether they are involved directly in electricity generation, transmission, distribution or its use. Eventually, the High Voltage Insulation Rubber Mats need to be tested ( with proven data from the local or international accredited testing body ) before being placed in electrical generator rooms. A) Product Characteristic:- 1) Material: RoHS 2 NATURAL RUBBER ( NR ) BASE POLYMER 2) Model Name : ( GS-SL ) Switchboard Matting / High Voltage Insulation Rubber Mat -- with Anti Slip ( Corrugated ) on Top Surface, Withstood 20kV ( Class 1 ), 3mm Nominal Thickness, Black Colour with Test Certificate No. : UPON REQUEST ( BS EN 61111: 2009 Clause 220.127.116.11 ) 3) Product Compliance Status:- A) BS EN 61111 Clause 18.104.22.168 Class 1, Voltage Withstand Test B) Comply with RoHS I & II, On 4th June 2015, Commission Directive (EU) 2015/863 was published in the Official Journal of the European Union (OJEU) to include the phthalates ( BBP, DBP, DEHP and DIBP, these are used to soften PVC and Vinyl ) into ANNEX II of the RoHS Recast Directive. The new law restricts each phthalate to no more than 0.1% ( mg/kg = ppm ; 0.1wt% = 1,000ppm ) in each homogeneous material of an electrical product. 4) Surface finishing: with an anti-slip corrugated surface to provide a safe working environment, Corrugated ridges run parallel to the length of the roll. 5) Available Dimension: Material Type : Natural Rubber ( NR ) base polymer with anti slip corrugated surface BS EN 61111 : 2009 Class 1 ( Withstood 20kV ) , GS-SL ( Medium Voltage ) A) Model : GS-SL , Switchboard Matting, ( Black colour ) , 3mm Tk x 915 mm ( 3ft or 0.915 m ) Width x 10,000mm ( 10 m ) Length/roll ( ~38 kgs/pc ), carton size : 230mm x 230mm x 1100mm =0.058 m³ 6) Label Indication.