speed bump malaysia speed bump malaysia
Copyright © GSE ONLINE SDN BHD ( 1116968-P ) ALL RIGHTS RESERVED
www.esdonlinemarketing.com       www.esdMalaysia.com


























​​​​​​​​​


​​​​​​​​​​​​​​​​​​






​​RUBBER SPEED BUMP


What is the difference between speed bumps and speed humps?
Speed bumps and speed humps are both used to slow vehicles, but they have different designs and are used in different places.



​​









​​​​




Speed Bumps
are raised pavement areas across a roadway. They are typically parabolic, circular, or sinusoidal in shape and are a gentle version of the speed bump. In fact, most speed bumps are found in parking lots and or along private roadways.


A) Product Name
Rubber Speed Bump

B) Raw Material :
Reclaimed Rubber

C) Purpose
Rubber speed bumps , to serve as a traffic-calming device for roads with speeding problems .
Speed bumps are not to be used to slow traffic at a given point , but rather to reinforce a safe and consistent speed .


D) Scope
Ideal for shop / factory / shopping mall roads , private roads and residential areas . Speed Bumps will only be considered on streets classified as local and residential streets with specified posted speed .

E) Characteristics
1) Manufacture from High Density Reclaimed Rubber
2) Available in black & yellow combination for greater visibility
3) Anti skid surface
4) UV , moisture and heat resistant.
5) All segments can be purchase separately


F) Specification -
A Full Set of speed bump consists of :- ( ~50mm Thickness , 350mm Width x 2,340mm , weight ~ 33kg / pc )

a) Model No. : SBY350X500 , Yellow , ~50mm Thickness x 350mm Width x 500mm Length / pc , weight ~ 7.5kgs / pc​
b) Model No. : SBB350X500 , Black , ~50mm Thickness x 350mm Width x 500mm Length / pc , weight ~ 7.5kgs / pc​
c) Model No. : ECY170X350 , Yellow ~50mm Thickness x 170mm Width x 350mm Length / pc , weight ~ 1.5kgs / pc​
d) Model No. : ECB170X350 , Black , ~50mm Thickness x 170mm Width x 350mm Length / pc , weight ~ 1.5kgs / pc

​​​
​The contractor / customer shall be responsible for Rubber bump installation .
1) 4pcs of Middle units ~50mm Thickness , 350mm Width x 500mm , weight ~ 7.5kg / pc x 4pcs = 30 kgs / set
2) 2pcs of End Caps ~50mm Thickness , 350mm Width x 170mm , weight ~1.5kg / pc x 2pcs = 3 kgs / set


​                        Road Width Standard in Malaysia :-
Standard                                          Max design speed limit ( km/h )                                  Minimum lane width ( m )                                               Application
JKR R2                                                                                         60
JKR U2                                                                  50                                                                          2.75                                                Minor roads / Local Streets
                                                                                                                                                                    Note: JKR R2 / U2 is the minimum  geometrical standard for 2-lane roads


RECOMMENDED accessories :- ( excluded )
1) Use ½ inch diameter lag bolts and 5-inch in length .

G) Rate Offer & Order

GSE ONLINE
SDN BHD   
 ( 1116968-P )​
​Terms & Conditions :
1) ​Cash & Carry
2) Transport charges not included​
3) Price revise without prior ​notification​
Mobile No.
012 6255512 / 016 2555632

( Tel ) Office :
03-8723 2455​​​

( Fax ) Office :
03-2178 4747​​​

E-mail :
sales@esdMalaysia.com

rubber speed bumps and rubber speed humps?

speed hump malaysia speed hump malaysia speed hump malaysia speed hump malaysia
 
 
 
SPEED HUMP MALAYSIA
 
 
 
GSE ONLINE SDN BHD
ECY170X350
ECB170X350
SBB350X500
SBB350X500
SBY350X500
SBY350X500
SBY350X500
SBY350X500
SBB350X500
SBB350X500
ECY170X350
ECB170X350
lag bolts Malaysia
* Optional Item :-
M12 X 5"​ Lag Bolt
Speed Bump Malaysia
Speed Bump Malaysia
Speed Bump Malaysia
Speed Bump Malaysia
Speed Bump Malaysia
lag bolt Malaysia
RubberSpeed Bump Quotation